- compact all-weather 4-channel amplifier
- 150 watts RMS x 4 at 4 ohm
- 200 watts RMS x 4 at 2 ohm
- 400 watts RMS x 2 bridged at 4 ohms
- CEA-2006 compliant
- designed and engineered in California, USA
- full-range Class D amp technology
- frequency response 10-30K Hz; signal-to-noise ratio: 95 dB
- Ch 1&2: variable high-pass filter (10-150 Hz, 6 or 12 dB/octave)
- Ch 3&4: variable high-pass, low-pass, and bandpass filters
- high-pass: 10-150 Hz, 6 or 12 dB/octave; low-pass: 45-150 Hz, 12 dB/octave
Focal HDK165-2014+
- component speaker system for select 2014-up Harley-Davidson motorcycles
- package includes two 6-1/2″ woofers, two tweeters, custom grilles and harnesses
- special grille houses K2 M-shaped inverted dome compression tweeter
- 6-1/2″ K2 Kevlar and glass-fiber sandwich woofer cone with TMD rubber surround
- inline crossovers
- frequency response: 60-21,000 Hz
- handles up to 125 watts RMS (250 watts peak)
- sensitivity: 92.5 dB
Focal HDA165-2014+
- component speaker system for select 2014-up Harley-Davidson motorcycles
- package includes two 6-1/2″ woofers, two tweeters, custom grilles and harnesses
- special grille houses aluminum inverted dome compression tweeter
- 6-1/2″ dual fiberglass sandwich woofer cone with butyl rubber surround
- inline crossover
- frequency response: 70-22,000 Hz
- handles up to 80 watts RMS (160 watts peak)
- sensitivity: 91 dB
Focal HDK165-98/2013
- component speaker system for select 1998-2013 Harley-Davidson motorcycles
- package includes two 6-1/2″ woofers, two tweeters, custom grilles and harnesses
- special grille houses K2 M-shaped inverted dome compression tweeter
- 6-1/2″ K2 Kevlar and glass-fiber sandwich woofer cone with TMD rubber surround
- inline crossovers
- frequency response: 60-21,000 Hz
- handles up to 125 watts RMS (250 watts peak)
- sensitivity: 92.5 dB
Focal HDA165-98/2013
- component speaker system for select 1998-2013 Harley-Davidson motorcycles
- package includes two 6-1/2″ woofers, two tweeters, custom grilles and harnesses
- special grille houses aluminum inverted dome compression tweeter
- 6-1/2″ dual fiberglass sandwich woofer cone with butyl rubber surround
- inline crossover
- frequency response: 70-22,000 Hz
- handles up to 80 watts RMS (160 watts peak)
- sensitivity: 91 dB
Focal FDP 1.900
- mono amplifier
- 550 watts RMS x 1 at 4 ohms (850 watts RMS x 1 at 2 ohms)
- CEA-2006 compliant
- full-range Class D amp technology
- variable high-pass filter (10-4,000 Hz, 24 dB/octave)
- variable low-pass filter (40-350 Hz, 24 dB/octave)
- variable bass boost (0-6 dB at 40 Hz)
- variable phase control (0-180 degrees)
Other Features:
- frequency response: 5-25,000 Hz
- preamp inputs and outputs
- speaker-level inputs (require speaker wire to RCA adapters)
- auto signal-detection & turn-on with high-level input
- wired remote level control with LED clip light included
- fuse rating: 25A x 2
- 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
- dimensions: 10-1/16″W x 2″H x 8″D
Focal FDP 6.900
- 6-channel car amplifier
- 150 watts RMS x 6 at 4 ohms
- 200 watts RMS x 6 at 2 ohms
- 400 watts RMS x 2 + 500 watts RMS x 1 bridged at 4 ohms
- full-range Class D amp technology
- frequency response 5-25K Hz; signal-to-noise ratio: 90 dB
- Ch 1-4: variable high-pass, low-pass, and bandpass filters (50-4000 Hz, 12 dB/octave)
- Ch 5-6: variable high-pass (subsonic), low-pass, and bandpass filters
- high-pass: 10-120 Hz, 12 dB/octave; low-pass: 45-1000 Hz, 24 dB/octave
Other Features
- wired remote subwoofer level control with LED clip light included
- preamp and speaker-level inputs (0.2-10V)
- signal-sense auto turn-on with high-level input
- wiring and hardware not included with amplifier
- 4-gauge power and ground leads recommended
- fuse rating: 25A x 3
- dimensions: 14-3/8″W x 2″H x 8-3/4″D
Focal FDP 4.600
- 4-channel car amplifier
- 150 watts RMS x 4 at 4 ohms
- 200 watts RMS x 4 at 2 ohms
- 400 watts RMS x 2 bridged at 4 ohms
- CTA compliant
- full-range Class D amp technology (frequency response: 5-25,000 Hz)
- Ch 1 and 2: variable high-pass filter (50-4000 Hz, 12dB/octave)
- Ch 3 and 4: variable high-pass and low-pass filters (50-4000 Hz, 12dB/octave)
- Ch 3 and 4: bandpass filter option (uses low-pass and high-pass settings) and stereo/mono switch
Other Features:
- remote subwoofer level control with LED clip light included
- preamp and speaker-level inputs
- speaker-level inputs require speaker wire to RCA adapters
- signal-detection turn-on with speaker-level input
- wiring and hardware not included with amplifier
- 8-gauge power and ground leads recommended
- fuse rating: 25A x 2
- dimensions: 10-1/16″W x 2″H x 8″D
Focal PS165SF
- 6-1/2″ component speaker system includes two woofers, two tweeters, and two external crossovers
- slatefiber woofer cone
- aluminum/magnesium inverted dome tweeter
- 4-ohm impedance
- handles up to 80 watts RMS (160 watts peak)
- frequency response: 60-21,000 Hz
- sensitivity: 91 dB at 2.83 volts
- mounting depth: 2-3/16″
- warranty: 1 year
Focal PS165FXE
- 6-1/2″ bi-amped component speaker system includes two woofers, two tweeters, and two crossovers
- flax woofer cone with “tuned mass damper” surround
- aluminum/magnesium inverted dome tweeter
- pre-wired crossover system with bi-amp connections
- 4-ohm impedance
- handles up to 80 watts RMS (160 watts peak)
- frequency response: 55-28,000 Hz
- sensitivity: 90.5 dB at 2.83 volts
- woofer top-mount depth: 3-1/16″